Test And Measurement
Wavetek Ideal LT8600 SM MM Fiber Cable Analyzer Tester (Ideal LT8600)
Wavetek Ideal LT8600 SM MM Fiber Cable Analyzer Tester
Includes FS 1310SM, FS1550SM, FS DualMM and Fiber Kit Power Meter.
Includes FS 1310SM, FS1550SM, FS DualMM and Fiber Kit Power Meter.
Avenger EZ Ultrasonic Flaw Detector Thickness Inspection Weld Gauge
Avenger EZ Ultrasonic Flaw Detector Thickness Inspection Weld Gauge
Included with the sale is the following:
- Avenger EZ Ultrasonic Flaw Detector
- Hard Case
- Owners Manual
- Couplant
- Batteries
- Charger
- 2 Longitudinal Probe
- Shearwave Probe
- 3 Wedges (45,60,75)
- Cable
- Thickness Probe (Dual)
- Shoulder Strap
Included with the sale is the following:
- Avenger EZ Ultrasonic Flaw Detector
- Hard Case
- Owners Manual
- Couplant
- Batteries
- Charger
- 2 Longitudinal Probe
- Shearwave Probe
- 3 Wedges (45,60,75)
- Cable
- Thickness Probe (Dual)
- Shoulder Strap
ISG K-90 TalismanXL Thermal Imager with DIGITEK II & Direct Temp
ISG K-90 TalismanXL Thermal Imager with DIGITEK II & Direct Temp
K-90 TalismanXL comes complete with the following:
K-90 TalismanXL Thermal Imaging Camera includes Optional DDT, Video Overlay & 2X Zoom
Hard Shell Carrying Case
Battery Charger with Power Supply & Car cord
Two (2) NiMH Batteries (batteries charge & work may need new ones for longer work time)
AA Battery Adapter
Pistol Grip Handle
Lanyard 8
Operating Manual
The ISG/Infrasys K-90/K90-SS2000 Talisman is a high performance thermal imager that is specifically designed for shipboard firefighting. Equipped with the DIGITEK II image enhancement system that offers many of the added performance benefits associated with microbolometer technology, yet the simplicity, ruggedness, and heat tolerance only available from field proven BST technology. The special viewing optics allow the user to hold the imager directly against the SCBA facemask sealing the imager against the mask for use in very dense class bravo smoke conditions typical of that aboard ships.
K-90 TalismanXL comes complete with the following:
K-90 TalismanXL Thermal Imaging Camera includes Optional DDT, Video Overlay & 2X Zoom
Hard Shell Carrying Case
Battery Charger with Power Supply & Car cord
Two (2) NiMH Batteries (batteries charge & work may need new ones for longer work time)
AA Battery Adapter
Pistol Grip Handle
Lanyard 8
Operating Manual
The ISG/Infrasys K-90/K90-SS2000 Talisman is a high performance thermal imager that is specifically designed for shipboard firefighting. Equipped with the DIGITEK II image enhancement system that offers many of the added performance benefits associated with microbolometer technology, yet the simplicity, ruggedness, and heat tolerance only available from field proven BST technology. The special viewing optics allow the user to hold the imager directly against the SCBA facemask sealing the imager against the mask for use in very dense class bravo smoke conditions typical of that aboard ships.
PRÜFTECHNIK Ludeca/Rotalign Ultra Laser Shaft Alignment system (ROTALIGN)
PRÜFTECHNIK Ludeca/Rotalign Ultra Laser Shaft Alignment system
It includes;
ALI 4.200 Rotalign ULTRA alignment computer with ALI 4.201 stand
ALI 4.603 Rechargable battery with charger
ALI 3.600 Receiver, including dust cap
ALI 3.581-2 Receiver cable, 2 m (6 ft)
ALI 3.610 Laser sneder
ALI 2.11 Set chain bracket set for shaft dia. up to 8 1/2 inches, 20 support posts, 300mm and 600mm long chains
ALI 3.608 Beam adjustment tube
ALI 4.800 Carrying case
ALI 13.701CD Alignment reporter software
ALI 4.502-2 and 4.503 USB to PC and USB to peripheral devices cables
ALI 2.11 set magnetic bracket system
It includes;
ALI 4.200 Rotalign ULTRA alignment computer with ALI 4.201 stand
ALI 4.603 Rechargable battery with charger
ALI 3.600 Receiver, including dust cap
ALI 3.581-2 Receiver cable, 2 m (6 ft)
ALI 3.610 Laser sneder
ALI 2.11 Set chain bracket set for shaft dia. up to 8 1/2 inches, 20 support posts, 300mm and 600mm long chains
ALI 3.608 Beam adjustment tube
ALI 4.800 Carrying case
ALI 13.701CD Alignment reporter software
ALI 4.502-2 and 4.503 USB to PC and USB to peripheral devices cables
ALI 2.11 set magnetic bracket system
PTW UNIDOS ROMEO RADIATION MONITORING ELECTROMETER
PTW UNIDOS ROMEO RADIATION MONITORING ELECTROMETER
UNIDOS Romeo is a high-precision reference class electrometer which provides the functionality you need for routine operation. Managing the built-in detector database is not fully automated, but much simplified with an intuitive user interface and ready-to-use detector templates.
• Striking Design.
• Exceptional Performance.
• Impressive Functionality
• Intelligent Detector Recognition
UNIDOS Romeo is a high-precision reference class electrometer which provides the functionality you need for routine operation. Managing the built-in detector database is not fully automated, but much simplified with an intuitive user interface and ready-to-use detector templates.
• Striking Design.
• Exceptional Performance.
• Impressive Functionality
• Intelligent Detector Recognition
PTW QUICKCHECK OCTAVIUS Detector 100
PTW QUICKCHECK OCTAVIUS Detector
Radiation Detector Type : Scintillation Detector
Radiation Detector Type : Scintillation Detector
Pruftechnik Rotalign Ultra Laser Shaft Alignment System (ROTALIGN ULTRA IS)
Pruftechnik Rotalign Ultra Laser Shaft Alignment System
MAKE: PRUFTECHNIK
MODEL: ROTALIGN ULTRA IS
MAKE: PRUFTECHNIK
MODEL: ROTALIGN ULTRA IS
- Shaft Alignment 3.11 Advanced
- 1EA ALI 3.610EX - S/N 2411108
- 1EA ALI 3.600EX S/N 10115914
- 1EA ALI 3.581-5 Cable
- 18EA Alignment Rods
- 4 Sets Chains
Datron / Wavetek 4600 Autocal Transductance Amplifier (4600)
Datron / Wavetek 4600 Autocal Transductance Amplifier
Extends calibrator currents to 11A Dc & AC rms
Slave mode programmable from 4708,4700 & 4705
Solo mode operation for general application
AC performance from 10 Hz to 20kHz
Extends calibrator currents to 11A Dc & AC rms
Slave mode programmable from 4708,4700 & 4705
Solo mode operation for general application
AC performance from 10 Hz to 20kHz
Datron 4000 Autocal Standard Ohm Current DCV Calibrator NIST (4000)
Datron 4000 Autocal Standard Ohm Current DCV Calibrator NIST
The Datron 4000 Autocal Standard is a DC voltage, DC current and resistance calibrator. It calibrates up to 8 1/2 Digit DMMs. DC Voltage; Ranges: 100 uV to 1000V in decades. Full Scale: 2X range, except 1000V range, where max output = 1100V. Resolution: 1 digit in 19,999,999 or 10nV, whichever is greater. DC Current (Opt 20); Ranges: 100 uA to 1A in decades. Full Scale: 2X range. Resolution: 1 digit in 1,999,999 or 100pA, whichever is greater. Resistance (Opt 20); Ranges: 1 ohm to 10 M-ohm in decades. (Ranges are nominal, actual calibrated values are displayed.) Display Resolution: 1 digit in 19,999,999. Calibration: Autocal from front panel or via the IEEE-488 interface. OPTIONS; 20: DCI and ohm Functions. 42: Alternative Rear Output.
The Datron 4000 Autocal Standard is a DC voltage, DC current and resistance calibrator. It calibrates up to 8 1/2 Digit DMMs. DC Voltage; Ranges: 100 uV to 1000V in decades. Full Scale: 2X range, except 1000V range, where max output = 1100V. Resolution: 1 digit in 19,999,999 or 10nV, whichever is greater. DC Current (Opt 20); Ranges: 100 uA to 1A in decades. Full Scale: 2X range. Resolution: 1 digit in 1,999,999 or 100pA, whichever is greater. Resistance (Opt 20); Ranges: 1 ohm to 10 M-ohm in decades. (Ranges are nominal, actual calibrated values are displayed.) Display Resolution: 1 digit in 19,999,999. Calibration: Autocal from front panel or via the IEEE-488 interface. OPTIONS; 20: DCI and ohm Functions. 42: Alternative Rear Output.
Datron Wavetek 4708 Autocal Multifunction Standard (4708)
Datron Wavetek 4708 Autocal Multifunction Standard
Options:
10 = 1000 Volt ranges (DCV and ACV)
20 = DC Current , AC Current and Resistance Functions
42 = Rear Output Terminals
80 = Line voltage 120V / 240V Selectable, 48-62 Hz
90 = Rack-mounting Kit
Options:
10 = 1000 Volt ranges (DCV and ACV)
20 = DC Current , AC Current and Resistance Functions
42 = Rear Output Terminals
80 = Line voltage 120V / 240V Selectable, 48-62 Hz
90 = Rack-mounting Kit
Fluke 434 3 Phase Power Quality Analyser (434)
Fluke 434 3 Phase Power Quality Analyser
Installed Options:
- V/A/Hz
- Dips & Swells
- Harmonics
- Power & Energy
- Energy Loss Calculator
- Power Inverter Efficiency
- Unbalance
- Inrush
- Monitor
Helps locate, predict, prevent, and troubleshoot power quality problems in three-phase and single-phase power distribution systems
Includes (4) i430 Flex Cables, Carrying Case & Accessories As Listed
Installed Options:
- V/A/Hz
- Dips & Swells
- Harmonics
- Power & Energy
- Energy Loss Calculator
- Power Inverter Efficiency
- Unbalance
- Inrush
- Monitor
Helps locate, predict, prevent, and troubleshoot power quality problems in three-phase and single-phase power distribution systems
Includes (4) i430 Flex Cables, Carrying Case & Accessories As Listed
Fluke 5720A/03 Multimeter Multi Function Calibrator (5720A)
Fluke 5720A/03 Multimeter Multi Function Calibrator
Features:
- Internal environmentally-controlled references allowing the calibrator to maintain full performance over a wide ambient temperature range
- Automatic meter error calculation obtained through using a simple output adjust knob; the display shows linearity, offset, and scale errors
- Keys that multiply and divide the output value by 10 to simplify work on meters with calibration points at decade multiples of a fraction of full-scale.
- Programmable entry limits used for restricting the levels that can be keyed into the calibrator, preventing access to levels that may be harmful to equipment or personnel
- A space key that provides the capability of displaying the instrument’s specification at the selected operating point, calibration interval, and specification confidence level
- An auxiliary current binding post that allows you to calibrate meters with separate current inputs without moving cables
- Real-time clock and calendar for date stamping reports
- Offset and scaling modes that simplify linearity testing of multimeters
- Variable phase reference signal output and phase-lock input
- Interface for the Fluke 5725 Amplifier
Hartridge Series 120 Cummins PT Test Bench Flow Panel Calibrating machine
Hartridge Series 120 Cummins PT Test Bench Flow Panel Calibrating machine
Very good condition.
Very good condition.
JDSU/ACTERNA TSR-37 Rubidium Timing Signal (TSR-37)
JDSU/ACTERNA TSR-37 Rubidium Timing Signal
Key Features
• Cost-effective timing source for telecom/metrology test/ measurement applications
• SDH/SONET/PDH, Jitter/Wander measurement source
• Compact, robust and lightweight, easy handling
• Cesium reference input with auto-calibration feature
• Accuracy 1 × 10-12 with GPS reference
• Outputs: E1/T1, 2048/1544 kHz
• With and without GPS input available
Key Features
• Cost-effective timing source for telecom/metrology test/ measurement applications
• SDH/SONET/PDH, Jitter/Wander measurement source
• Compact, robust and lightweight, easy handling
• Cesium reference input with auto-calibration feature
• Accuracy 1 × 10-12 with GPS reference
• Outputs: E1/T1, 2048/1544 kHz
• With and without GPS input available
MDC Calibration Kit for Network Analyzer
MDC Calibration Kit for Network Analyzer
In very good condition
In very good condition
Measurements International resistance Resistor Standard calibration (4310 A)
Measurements International resistance Resistor Standard calibration
Brand : Measurements International
Model: 4310 A
Brand : Measurements International
Model: 4310 A
PCB PIEZOTRONICS IMI HANDHELD SHAKER ACCELEROMETER VIBRATION CALIBRATION
PCB PIEZOTRONICS IMI HANDHELD SHAKER ACCELEROMETER VIBRATION CALIBRATION
USED CONDITION !!!
USED CONDITION !!!
AMETEK RK-300 Dead Weight Tester (RK-300 )
RK-300 Dead Weight Tester
The floating ball Ametek RK pneumatic deadweight tester is engineered to offer user-friendly features, safe operation, and an optimal performance in the field or in the lab.
The Ametek RK pneumatic deadweight tester produces pressure by applying force (weight set) over area (the ceramic ball and nozzle). While in operation, the Ametek RK pneumatic deadweight tester's ball and weights float freely, supported only by a thin film of air which is virtually frictionless. This eliminates the necessity to rotate the weights during testing and allows the user to concentrate on the instrument calibration.
The Ametek RK pneumatic deadweight tester is self-regulating with accuracy independent of the operator. The built-in flow regulator automatically adjusts the input air flow to maintain the ball and weights in a float position. The regulator also compensates for variations in pressure from the air supply. These features of the Ametek RK pneumatic deadweight tester eliminate the necessity of having to continually adjust the supply during the test and provides for an easy up and down scale calibration.
The setup for the Ametek RK pneumatic deadweight tester is completed by simply connecting two tubes, one for the supply and one for the unit-under-test, leveling the RK, and adding the appropriate weights. Operation is fast and efficient with no valves to adjust and no regulation needed between set points. Pressure regulators are not required if the air supply is within the tester's operational requirements.
TEKTRONIX CG551AP OSCILLOSCOPE CALIBRATOR GENERATOR
Brand:TEKTRONIX
Model:CG551AP , SG503 , TM515
Type:Calibrators, Standards
Model:CG551AP , SG503 , TM515
Type:Calibrators, Standards